Low-Cost IoT-Enabled Wind Energy System with SCADA Integration for Smallholder Farming Applications

Authors

  • Jeremiah Tashie Wosu
  • Winner Minah-Eeba

Keywords:

IoT, Renewable energy, SCADA, Smallholder farming, Wind turbine

Abstract

Energy access remains a critical bottleneck for smallholder farmers across Sub-Saharan West Africa, where unreliable grid infrastructure and rising fuel costs constrain the use of mechanized and digital agricultural tools. This paper presents the design and implementation of a low-cost, Internet of Things (IoT)-enabled wind energy system with Supervisory Control and Data Acquisition (SCADA) integration, developed using open-source hardware and software platforms for decentralized farm power generation and monitoring. The proposed system integrates a micro wind turbine, Arduino-based control unit, Raspberry Pi IoT gateway, and SCADA interface for real-time performance visualization and automation. Sensor modules measure parameters such as wind speed, turbine rotational speed, voltage, and current, while IoT connectivity via the Message Queuing Telemetry Transport (MQTT) protocol enables remote data transmission and analytics. A low-cost Maximum Power Point Tracking (MPPT) algorithm ensures optimal turbine performance, and SCADA integration provides fault detection, energy yield analysis, and predictive maintenance alerts. Prototype testing demonstrated a maximum output of 450 W at 12.6 m/s wind speed, with system efficiency of 83% under variable wind conditions. The total hardware cost was under $ 250, significantly reducing entry barriers for smallholder adoption. The framework’s open-source architecture and modular design support scalability and customization for various agricultural applications, including water pumping, grain milling, and cold storage systems. This work contributes a practical, affordable, and sustainable model for rural energy resilience, promoting digital inclusion and the productive use of renewable energy in smallholder farming systems across Sub-Saharan West Africa.

References

O. A. Oluokun, O. Akinsooto, O. B. Ogundipe, and S. Ikemba, “Integrating Renewable Energy Solutions in Urban Infrastructure: A Policy Framework for Sustainable Development,” International Journal of Multidisciplinary Research and Growth Evaluation, vol. 5, no. 1, pp. 1035–1048, Feb. 2024.

F. Ishtiaq, “Rural Microgrids in the Improvement of Supply Security: Case of Bangladesh,” Lappeenranta University of Technology Repository, 2025.

W. Khalid, “Design and Analysis of Hybrid Power System and IoT SCADA System for Remote Sites,” Memorial University Research Repository, 2024.

L. O. David, C. Aigbavboa, N. Nwulu, and O. O. Adepoju, “Role of Fourth Industrial Revolution (4IR) Technologies in Water, Energy, and Food (WEF) Resources,” Green Energy and Technology, pp. 239–286, 2024.

A. A. Akinsanola, K. O. Ogunjobi, A. T. Abolude and S. Salack, “Projected changes in wind speed and wind energy potential over West Africa in CMIP6 models,” Environmental Research Letters, vol. 16, no. 4, pp. 1-13, Mar. 2021.

M. N. O. Sadiku, Emerging Technologies in Africa, Boca Raton, CRC Press, 2025.

K. Ransford Teng-viel, “Promoting Renewable Energy Technologies in Smallholder Agriculture: Examining Factors Influencing Smallholder Farmers Adoption of Renewable Energy Technologies in Lawra, Upper West Region-Ghana,” School of Natural and Environmental Sciences, PhD Thesis, 2026, Ncl.ac.uk, 2024.

A. Y. Oudah and L. M. Shaker, “Wireless Sensor Networks in Renewable Energy Monitoring: A Comprehensive Survey of Protocols and Applications,” AUIQ Technical Engineering Science, vol. 2, no. 2, Jul. 2025.

B. Aljafari, S. Vasantharaj, V. Indragandhi, and R. Vaibhav, “Optimization of DC, AC, and Hybrid AC/DC Microgrid-Based IoT Systems: A Review,” Energies, vol. 15, no. 18, p. 6813, Sep. 2022.

A. Hamied, A. Mellit, M. Benghanem, and S. Boubaker, “IoT-Based Low-Cost Photovoltaic Monitoring for a Greenhouse Farm in an Arid Region,” Energies, vol. 16, no. 9, p. 3860, Apr. 2023.

D.-B. L. Douti et al., “SolarCollectorApp: An Open-Source Platform for the Democratization of Solar Thermodynamic Systems in Africa,” Photonics in Africa, vol. 14105, p. 17, May 2026.

A. Okeke, “Evaluating Sustainable Practices and Supply Chain Management Effectiveness in African Small and Medium-Sized Enterprises (SMEs),” Journal of sustainability research, vol. 6, no. 2, Jun. 2024.

T. Burton, N. Jenkins, D. Sharpe, and E. Bossanyi, Wind Energy Handbook, 2nd ed. Chichester, U.K.: John Wiley & Sons, 2011.

C.-Y. Chen, S.-H. Wu, B.-W. Huang, C.-H. Huang, and C.-F. Yang, “Web-Based Internet of Things on Environmental and Lighting Control and Monitoring System Using node-RED, MQTT and Modbus Communications Within Embedded Linux Platform,” Internet of Things, vol. 27, p. 101305, Oct. 2024.

Q. Jia, W. Jiao, S. Chen, Z. Yan, and H. Sun, “A trustworthy cloud-edge collaboration framework for scheduling distributed energy resources in distribution networks,” IEEE Transactions on Smart Grid, vol. 16, no. 3, pp. 2691–2694, 2025.

M. O. Qays et al., “Monitoring of renewable energy systems by IoT-aided SCADA system,” Energy Science & Engineering, vol. 10, no. 6, pp. 1874–1885, 2022.

S. G. Ajumo, F. K. Opara, O. C. Nosiri, and T. C. Oguichen, “Development of an IoT Based Process Plant Emission Controller,” International Journal of Scientific Engineering and Science, vol. 3, no. 4, pp. 69–75, 2019.

M. J. Khan and L. Mathew, “Comparative study of maximum power point tracking techniques for hybrid renewable energy system,” International Journal of Electronics, vol. 106, no. 8, pp. 1216–1228, 2019.

D. J. Cerezo Quina, T. F. Santos, J. A. Butron Llamoca, G. A. Echaiz Espinoza, A. Ortiz Salazar, and E. R. Llanos Villarreal, “Open-source SCADA system implementation for hybrid microgrid management with renewable energy sources,” International Journal of Electrical and Electronics Engineering, vol. 12, no. 1, pp. 114–128, 2025.

J. Leary, A. While, and R. Howell, “Locally manufactured wind power technology for sustainable rural electrification,” Energy Policy, vol. 43, pp. 173–183, 2012.

K. Muchiri, J. N. Kamau, D. W. Wekesa, C. O. Saoke, J. N. Mutuku, and J. K. Gathua, “Evaluation of power performance and economic viability of a wind-solar hybrid energy system for installation in low wind speed regimes in Kenya,” Journal of Agriculture, Science and Technology, vol. 24, no. 2, 2025.

International Electrotechnical Commission, Wind Energy Generation Systems—Part 12-1: Power Performance Measurements of Electricity Producing Wind Turbines, Geneva, Switzerland, 2022.

W. F. Guthrie and N. A. Heckert, NIST/SEMATECH e-Handbook of Statistical Methods, National Institute of Standards and Technology, Gaithersburg, MD, USA, 2002.

E. Bauer, Design for Reliability: Information and Computer-Based Systems. Hoboken, NJ, USA: Wiley-IEEE Press, 2010.

Published

2026-11-13